Subsea welding goes deeperA decade of research at the UK's Cranfield University has confirmed that subsea welding can be successfully conducted at depths of up to 940m, more than 600m deeper than previous records and far deeper than the 180m depth limit for divers…
Mercon Steel Structures in Gorinchem started work at the beginning of February on its first riser access tower (RAT) under a framework agreement signed with Shell UK and NAM last autumn. The 800t structure, due for delivery mid- August, is for NAM's K/15 field…
Investments in the region of NKr65 billion are on the cards over the next few years following ConocoPhillips' recent submission of its plans for the further development of the Ekofisk and Eldfisk fields to the Norwegian Ministry of Petroleum & Energy…
Decommissioning and abandonment specialist Cutting Underwater Technologies (Cut) assisted Heerema's Thialf with the removal of the Norpipe 37/4A booster platform's eightlegged steel jacket as part of Norway's Ekofisk cessation project. The 5500t platform stood in 85m of water…
OPITO, the Aberdeen-headquartered body serving as the focal point for skills, learning and workforce development in the UK energy sector, estimates that over 15,000 new posts will be required over the next five years to deliver UK offshore project plans…
Subsea equipment specialist Seatools is scheduled to deliver its latest offshore innovation – a remotely operated vehicle system that will combine the functions of a survey ROV with those of a fallpipe rock-dump ROV – this summer.The pioneering…
Non-invasiveness, good repeatability and high coverage are listed among the key subsea selling points for ClampOn's new subsea corrosion-erosion monitor (CEM), the prototype of which will be on display for the first time at Houston's OTC show next month…
Ever seen the effect on the seabed of a 300t BOP dropped from a rig? Marin's George Stroud, aka Boris or the 'Deepwater Red Adair', has and he likens it to a carpet tack being driven into the floor with the force of an impact hammer. The subsea…
The Marin Subsea asset recovery team was recently called in to recover a blowout preventer and lower marine riser package from 488m of water in Brazil. Within 20 minutes of the initial phone call, the Marin team had made a preliminary assessment…
Exploration and production at greater depths and a heightened emphasis on safety could mean even bigger roles for ROVs in offshore operations. Experts say the machines are not just up for the challenge, but ahead of the game. Russell McCulley reports…
No crystal ball is needed to determine one area of offshore activity where spending will rise inexorably in coming years: inspection, repair and maintenance. With one leading commentator predicting this sector’s annual spend will reach $7 billion by 2014…
Water jetting is now a well-established subsea approach and the technology has evolved significantly in the 30 years since the first mass-flow excavation (MFE) tool reached the market. David Morgan looks at the latest such development: the Marin Group Evo Claycutting system…
A configuration change-up on traditional spars could spell out some relief in wind load, drop the unit’s center of gravity, slim down the hull, and cut the amount of tripping time needed for drilling operations from a spar. OE’s Jennifer Pallanich…
With the increased complexity of today’s subsea production systems giving mooring solutions providers much to think about, Viking Moorings chief executive Wolfgang Wandl discusses how his company is rising to the challenge.The global mooring…
First Subsea and Offspring International, the worldwide agent for the offshore division of Lankhorst Ropes, have introduced the LankoFirst series of fiber rope connectors for deepwater moorings that the companies say are stronger, lighter, smaller…
Subscribe
